Step How to Redoing Hardwood Floors

Redoing Hardwood Floors – He simply drawback: shabby-looking old mill floors with roughly a century’s worth of dirt embedded in them. Sarah and her husband, James, are true fans of style (check out their latest job here), so obviously she created the notion of not painting her flooring but channeling Ettore Sottsass, the bizarre and visionary Italian designer supporting the Iconic ’80s design collective Memphis, to get a painted flooring inspector.

Redoing Hardwood Floors

Whether you are a Memphis fan or not, the fundamentals of redoing hardwood floors are exactly the same, so continue reading to see how we changed this flooring from filthy to stunning with just a little paint and sandpaper.

What You Will Need:

  • Flooring paintPaint Editor
  • 150-grit glue and stick sander
  • Dust mask
  • Paint roller and stick
  • 2-inch paintbrush
  • Painter’s tape
  • Pencil and eraser (optional)
  • Picture editing applications (optional)
  • Printer (optional)
  • Little celebrity paintbrush (optional)
See Also:  Home Fashion Designs

Prep Your Floors

Prep Your Floors - Redoing Hardwood Floors

Start by trimming your flooring with 150-grit sandpaper. We utilized a pole sander, which resembles a Swiffer but retains sandpaper and can save you from needing to sand onto your palms and knees. In addition, I propose wearing a dust mask. Use a vacuum after which a mop to wash the floors and eliminate any dust. When the redoing hardwood floors are dry, then you are ready to proceed to paint.

Painting by Redoing Hardwood Floors

Painting - Redoing Hardwood Floors

Not all of the redoing hardwood floors are made equal. Someone in the regional paint shop can advise you on the ideal sort of paint. As a rule of thumb, oil paints are more durable but give off fumes and also require a very long time to dry. Water-based paints are easier to use, dry quicker, and are less hazardous.

Start by painting a boundary (roughly 6 inches thick) around the edges of the ground. I discovered that I was able to do so neatly with no usage of painter’s tape, but it is really a personal option. If you are concerned about getting paint on your walls or molding you need to employ painter’s tape before beginning. Finish painting the inside sections together with your own paint roller attached to a rod. The rod, essentially a lengthy screw-on manage, makes fast work of lots of square footage and saves you from having to lean over. I strongly suggest it!

Adding Pattern

Adding Pattern - Redoing Hardwood Floors

We discovered a picture of this Memphis print Sarah desired, called Bacteria, online and subsequently used Photoshop (however any photograph app will do) to expand the layout to our preferred scale. We then published our outsized image in sections and then recorded the bits together to create our life-size template. We utilized two long spans of painter’s tape spaced 30 inches apart from delineating the borders of the runner.

Adding Pattern 2 - Redoing Hardwood Floors

I used a pencil to color the rear of the template, making a type of DIY carbon paper. This technique will let you follow the design on the front of the document whilst shifting the design to the ground. You may have to reshape the rear of your template when the moved lines begin getting too mild. Since this routine is really organic, we just traced our template several times, moving it between the recorded edges before the runner has been stuffed into our pride. We completed the runner by painting at the shapes with a small artist brush then stood back to admire our Memphis masterpiece.

error: Content is protected !!