How to Build a Pool Table Step by Step

How to Build a Pool Table – The pool table in this project is built largely of medium-density fiberboard (MDF) since it is hardy and inexpensive. The bottom is fitted using a honeycomb grid to conserve the top out of warping. The table includes built-in compartments to your own rack, cue sticks, and billiard-ball tray. Walnut railings and a glowing sensed cover with gold trimming add some class.

DIY Build - How to Build a Pool Table

See Also:  Most Unique Chess Sets for Sale in 2018

Materials: (How to Build a Pool Table)

  • Five sheets of 4-by-81/2-inch medium-density fiberboard
  • Five sheets of 4-by-83/4-inch medium-density fiberboard
  • Five walnut planks measuring 8 ft by 8 inches from 3/4-inch
  • Three walnut planks measuring eight ft by 8 inches from 3/4-inch
  • Five 8-foot pine 2-by-4-inch boards
  • 9-foot precut felt mattress and railings (bright red)
  • 2 16.5-oz headphones of high-strength spray glue
  • Six K-66-style 9-foot cushions (rubber bumpers), cut match for the project
  • Six Western-style tooled-leather pool pockets
  • Billiard accessory kit (includes pool balls, wooden horn, brushes, and four cue sticks, cue chalks, pool-table cover)
  • 1 mill of dark brown latex paint
  • One roster of 1/2- or 3/4-inch-wide white paper tape
  • 2 cans of gold spray paint
  • 1 gallon of primer
  • One will of wealthy brown furniture wax.

Build - How to Build a Pool Table

Tools: (How to Build a Pool Table)

  • Table saw
  • Chop saw
  • Band saw
  • Jigsaw
  • Hole found
  • Manual watched
  • Router
  • Nail fur and claws
  • Stapler and staples
  • Wood adhesive
  • Five to 10 wood knobs
  • Lathe
  • Chisels
  • Sandpaper
  • Orbital Sander
  • Drill
  • Screws
  • Biscuit Joiner
  • Cookies
  • Drill press
  • Planers
  • Measuring tape
  • Disposable brushes
  • Store towels
  • Razor blade

Dimensions: (How to Build a Pool Table)

  • Surface (playing area) complete: 31/2 ft by 7 ft
  • Tapered sides: 5 inches by 10 inches by 1 foot top
  • Complete leg dimensions: 6 inches from 113/4 inches by 16 inches top
  • Bun in addition: 3 inches high by 10 inches round
  • Bun at base: 3 inches high by 7 inches round
  • Molding: two inches wide
  • Square (routered) shirt: 1 foot
  • Square (routered) underside: 6 inches
  • Tapered Sides of Table:
  • Long sides: 6 ft by 6 inches by 13 inches top
  • Brief sides: 4 ft by 13 inches top
  • Molding: two inches wide
  • Ball holster/slot: 37 inches wide by 3 inches top
  • Holes (six): 4 7/8-inch opening using a 1/4-inch lip (round-over piece for the router)
  • Rails: two3/4 inches (upper horizontal surface) wide by 4 to 5 inches top
  • Rubber bumpers: 49-inch lengths (cut to fit); finish dimensions 1.177 inches from 0.968-inch.

Pool Table Light - How to Build a Pool Table

Step by Step: (How to Build a Pool Table)

  • Using a table saw and chop saw, cut 1/2-inch 4-by-8-foot medium-density fiberboard (MDF) sheets into the back faces of the four arms (just two of the identical side to every leg). There’s not any specific angle into the taper. Cut an opening in the center of this replicate aspect of each leg using a band saw, which creates a 2-inch rim (it resembles a framework).
  • Cut two 3/4-inch MDF squares for every leg – the shirt is really a 1-foot squarefoot, and the base is really a 6-inch square – and router that the borders. Cut bamboo boards into 1-by-1-inch strips to match the four corners of their tapered sides. Router the strips, mimicking the squares. Everything for the legs ought to be glued and nailed into position.
  • For the best bun, cut and paste three 3/4-inch-by-10-inch squares into a block. Clamp and let dry. Cut a circle from this cube (10-inch diameter). Using a router and also a lathe, make a convex border on the bun. For your base bun, follow exactly the identical procedure, but utilize three 3/4-inch-by-7-inch squares and shape a concave border on the bun. Sand as required. Glue and nail everything into position. Repeat procedure for many legs.
  • To produce the tapered sides, then cut four 78-by-13-inch MDF bits, following the angle of the thighs. Cut the 2-inch-wide molding from two of those four bits. The molding subsequently goes over the complete MDF bits. Repeat the procedure for those endings, but utilize 48-by-13-inch bits, and correct measurements accordingly. Apply pine strips step two explains. Glue and nail into position.

Plank and Hide - How to Build a Pool Table

  • When the sides have been all together, glue and nail 1-inch MDF strips into the inside edge of each corner.
  • On a few of the longer sides of this desk, centered, cut a 37-by-3-inch rectangle in preparation for your ball slot machine. This eliminated part will grow to be the rear wall of this ball slot, place inside the desk. For your outside, cut off a rectangle framework from pine strips: the lightest strip is just 1 inch wide and approximately 1/2-inch outside both sides of the rectangle hole; the other side would be 1/2-inch broad in addition to the elevation of the gap; the underside protrudes approximately two inches and inches around hold the chunks. Router the borders for the style. The front-most border is going to probably be 1/2-inch thick. Glue and nail into position.
  • To get assistance, insert 2-by-4’s around the length of the base of how to build a pool table.
  • Together with the ball rack in your right, using a hole saw, drill four1/2-inch-wide holes spaced 1 inch apart in the brief end of the desk, and 3 inches above the floor molding.
  • Every pit includes a three-sided rectangular framework inside the desk to hold the clues. The components are 3 inches wide and approximately 60 inches long and are trimmed from 3/4-inch MDF. Glue and nail the components into position and inside the desk surrounding every hole accordingly.
  • Cut a 3-inch-high, 1-foot-wide rectangle of MDF two inches above the holes to the clues. In the bottom edge of the hole, you may nail and paste in a 9-inch-long, 14-inch-wide system to hold the horn. To hold both angled surfaces of the triangle, then nail snugly between both of these pieces.
  • Cut four pre-assembled bits (approximately 3 inches) of 3/4-inch walnut to act as guides to every place over the corners. Find persistent leg rankings, and twist in the guides so that the legs consistently find their location. Sand everything lightly with sandpaper and an orbital sander.
  • Cut a 3/4-inch sheet of MDF to match the cover of the table using a circular saw; it may expand 6 inches on each side (like your railing and bumper). Using a jigsaw, cut off six holes in the MDF (four corners, then two in centers of long sides) in 4 7/8 inches and formed in a half-circle. The general angle of these holes is 90 levels, to adapt the railings. Produce a template to get a corner pocket and also a center pocket, and follow it differently. Router the inside edge of each pocket into 1/4-inch to get a lip for those balls.

Pool - How to Build a Pool Table

  • The railings are made from walnut boards. Each rail part is triple-segmented to mimic a curve going in supporting the dining table. The best rail bit is two3/4 inches broad, the angled bit is just 11/2 inches, and also the vertical bit is 4 inches to 5 inches. An extra inner bit (approximately 1 inch square to the end) which can hide beneath the railings will aid in attaching the rails to the table. There’ll be six railroad segments, a couple of the exact same (the endings) and four of exactly the same (the sides) (approximately 3 ft for each). Attach the rails using a biscuit joiner and paste. Clamp them and place to dry.
  • Twist the MDF tabletop above and, with walnut, type a honeycomb pattern which contains 10-inch squares. Center this routine around the MDF. This may act as service for the dining table and will assist match it in easily.
  • Primer the outside for a base coating, minus the railings and also the tabletop.
  • Unclamp the railings that are dried. Smooth the curve using a foundation, planers and also a router. Use an orbital sander. Cut the railings into segments to match between the pockets. Drill holes to take the bolts of these pockets inside every pocket (12 holes incomplete). Construct a jig for consistency, using a drill press for those holes. Try out a dry match of the railings and also the pockets, and trimming or sand as vital.
  • Disassemble any joining rails, rub abundant brown furniture wax onto the railings, and paint the base of the table (thighs and foundation) using dark brown latex paint.
  • Cut using a razor and extend the crimson felt across the table, smoothing it move, and spray-glue it into position. Staple it around the sides for additional support.
  • Begin to construct the railings and pockets working your way around the perimeter. Function in small segments. Utilize the pocket magnets and twist up the pockets from the ground till they’re comfy. Attach the railings and pockets into the dining table with spray adhesive and nails of how to build a pool table.
  • Cut the rubber bumpers to match the pockets. Stretch red felt paste and staple them, and then spray-glue them into position onto the table inside a border.
  • In the routered edges and inside edges of the underside painted part of the dining table cut and apply bits of white paper tape that’s been spray-painted gold.
error: Content is protected !!